Stratasys J850 User Manual page 137

Stratasys J850/J835 User Guide
8. Disconnect the fittings:
9. Remove the part of the fitting remaining on the pump tube, and save it.
10. Rotate the white restraining clip to release the pump.
DOC-18001 Rev. N
a. Unscrew the fittings that connect each waste-pump tube.
b. Separate the tubes and put them into the disposable cup to catch
material that spills.
Figure 4-162 Disconnecting pump tubes
Figure 4-163 Releasing the pump (sample)
4 Operating and Maintaining the Printer
4-106