Table of Contents
Advertisement
Stratasys J850/J835 User Guide
Note: Do not disconnect the power connection to the cooling fans.
6. Loosen the screw securing the UV lamp cover (A), and pull the cover up
7. Pull the UV reflector out of the UV housing.
8. Using a 2.5-mm hex key, remove the UV lamp clamp (2 screws).
DOC-18001 Rev. N
(B), then out (C).
Figure 4-178 Removing the UV lamp cover
Figure 4-179 Removing the UV lamp reflector
Figure 4-180 Removing the UV lamp clamp
4 Operating and Maintaining the Printer
4-115
Advertisement
Table of Contents
