Table of Contents
Advertisement
Stratasys J850/J835 User Guide
4. Open the panel and disconnect the ground (earth) wire.
5. Remove the panel.
6. Identify the waste pump that requires tube replacement.
7. Put on protective gloves and eye wear.
Caution
Uncured printing material might cause skin and eye irritation. Use
disposable cleaning gloves to protect your hands and protective eye wear to
protect your eyes.
DOC-18001 Rev. N
Figure 4-160 Ground wire connected to panel
Figure 4-161 Waste pumps (sample)
4 Operating and Maintaining the Printer
4-105
Advertisement
Table of Contents
