Stratasys J850 User Manual page 120

Stratasys J850/J835 User Guide
UV Sensor Connected to Printer
The following steps apply when using the Stratasys UV sensor box that you
connect to the printer. They do not apply when using a UV external radiation
measuring device.
1. To synchronize the wizard and the UV sensor, enter the CF number from
DOC-18001 Rev. N
the label on the back of the UV sensor box.
Figure 4-134 UV sensor synchronization
Figure 4-135 Label on the bottom of the UV sensor box
4 Operating and Maintaining the Printer
4-89