Table of Contents
Advertisement
Stratasys J850/J835 User Guide
Replace print heads only after consulting with an authorized Stratasys
service provider.
DOC-18001 Rev. N
The wizard uses the data collected to analyze the condition of the print
heads and optimize them so they print with a uniform layer of material.
❒ If the heads are in satisfactory condition, the following wizard screen
appears.
Figure 4-110 Final wizard screen, after optimizing print heads
❒ If the wizard determines that a print head is faulty—or that it is
negatively affecting part quality with the current head configuration—
you need to replace it. Indicate whether or not you want to do so now.
Figure 4-111 Defective print heads found
• Select Replace defective head(s) if you are prepared to replace
the print heads now (see below).
or—
• Select Abort wizard if you want to replace the print heads at
another time.
4 Operating and Maintaining the Printer
4-75
Advertisement
Table of Contents
