Stratasys J850/J835 User Guide
4. In the Advanced Settings screen, select Manual slot selection and click
5. When the Material Replacement Options screen opens again, select:
Make sure that the printer is loaded with the selected materials. This
procedure requires seven model materials to flush all of the channels in the
print-block pre-heater.
6. Click Next.
DOC-18001 Rev. N
Apply.
Figure 4-152 Manual slot selection
❒ 7 materials
❒ Economy
Figure 4-153 Selections in the Material Replacement Options screen
4 Operating and Maintaining the Printer
4-100