Table of Contents
Advertisement
Stratasys J850/J835 User Guide
2. After the printer-control computer boots, log in to Windows and launch the
A HASP plug containing a valid product activation key is required on the
printer computer. This is supplied during printer installation or upgrade. If
the application does not open and a HASP message appears, contact your
Stratasys dealer or service provider.
All monitoring and controlling of the printer is done from this interface.
The figures in this guide are based on the J850/J835 printer interface. For J850
Digital Anatomy printers, the name of the printer appears in the printer
interface
Figure 4-3 Printer interface
DOC-18001 Rev. N
The main power switch turns on the J850/J835 printer, which includes the
built-in computer.
printer-control program:
❒ On the printer-computer desktop, double-click the J850/J835 printer
icon.
or—
❒ From the Windows Start menu, select (All) Programs > Objet >
J850/J835.
4 Operating and Maintaining the Printer
4-4
Advertisement
Table of Contents
