Table of Contents
Advertisement
Stratasys J850/J835 User Guide
10. Measure the fabric thickness using a micrometer, ABS digital thickness
11. In the following screen, enter the thicknesses (in millimeters) of:
If you are printing directly on the tray, set the double-sided adhesive tape
thickness to 0.
DOC-18001 Rev. N
gauge,
Figure 4-10 Measuring the fabric thickness
Note: To convert from microns to millimeters, divide the value by 1000 (for
example: 1000 microns = 1 millimeter).
❒ the fabric.
❒ the double-sided adhesive tape.
Set the double-sided adhesive tape thickness to the measurement that
is printed on the tape or package. The thickness of the supplied double-
sided adhesive tape is 0.3 mm.
Figure 4-11 Enter thickness parameters to prepare for printing
4 Operating and Maintaining the Printer
4-11
Advertisement
Table of Contents
