Stratasys J850/J835 User Guide
16. If you printed a carpet, add the double-sided adhesive tape as follows:
17. Do one of the following:
DOC-18001 Rev. N
a. Using a rubber hand roller, place the double-sided adhesive tape on the
carpet and ensure that it covers the entire tray surface.
Figure 4-15 Elevated tray with carpet (sample)
Figure 4-16 Placing double-sided adhesive tape on the elevated tray
(sample)
b. Remove the backing of the double-sided adhesive tape.
Figure 4-17 Double-sided adhesive tape backing removed (sample)
❒ If the tray has a carpet with a double-sided adhesive tape, place the
fabric over the double-sided adhesive tape.
❒ If the tray is clean, place the fabric directly on the tray.
4 Operating and Maintaining the Printer
4-13