Stratasys J850/J835 User Guide
You can monitor printer status by switching the printer interface display. To do
this, click the display toggle button on the printer interface screen.
Figure 4-4 Printer status
Preparing the Build Tray for Printing on Fabric (3DFashion Technology)
When printing with J850 printers that are enabled by 3DFashion technology,
you need to place the fabric on the build tray and secure it. Tray type, fabric
type, thickness, size, and printing material can affect the build tray preparation
process. For example, the build tray can be removable, which affects whether
the tray is elevated while you secure the fabric to the tray.
In addition, if you need to print with flexible materials, the tray preparation
includes printing a carpet directly on the tray and attaching a double-sided
adhesive tape.
Warning: Fire Hazard
Using fabrics when printing is a potential fire hazard. Do not use fabrics that
have an ignition temperature or melting point below 105°C (221°F).
DOC-18001 Rev. N
4 Operating and Maintaining the Printer
4-7