Table of Contents
Advertisement
Stratasys J850/J835 User Guide
11. Using the polyurethane tube provided in the kit, push the new UV lamp bulb
12. Twist the tube by 180° (a), and continue to insert the UV lamp bulb into the
DOC-18001 Rev. N
into the UV reflector. Make sure that the tip on the bulb is facing the
direction of the top of the reflector.
Figure 4-183 Pushing the new UV bulb into the UV reflector
UV reflector (b). Make sure that the tip on the bulb is facing the direction of
the opening of the reflector.
Figure 4-184 Twisting the tube and inserting the UV lamp bulb
4 Operating and Maintaining the Printer
4-117
Advertisement
Table of Contents
