(Comment Words) - Toho Electronics TRM-10C Instruction Manual

(6)

(Comment Words)

Example) When setting "ON" for Comment 1(
Display
(Setting of 1st Character)
(Setting of 2nd Character)
(Setting of 3rd Character)
(Setting of 9th Character)
(Setting of 10th Character)
(Setting of 11th Character)
(Setting of 16th Character)
［Note］
⚫ When the number of comment characters is less than 16, set the "
characters. See page 59 for Character Code Table.
⚫ The digit is not display after setting the "
⚫ The comment setting is not effective without the DI option. Do not set the comment setting.
Operation keys
ESC
Hold down the "MENU" key for 3 seconds or more
3sec
MENU
to enter the setup mode. Use the △ key to display
ENT
PRINT
"
Use the △ key to display "
ENT
PRINT
"ENT" key.
Use the △ key to select a comment number.
ENT
PRINT
Display "
Set "
PRINT
FEED
select a code, and use the
ENT
Press the "ENT" key.
Set "
PRINT
FEED
Operate in the same manner as setting the 1st
ENT
character to end.
Set "
PRINT
FEED
Operate in the same manner as setting the 1st
ENT
character.
Repeat setting for each channel.
Press the "ENT" key. Setting is completed.
ENT
To return to the user mode, hold down the "MENU"
key for 3 seconds or more.
―68―
).
Description
", and press the "ENT" key.
" and press the "ENT" key.
" as the 1st character. Use the △ key to
" as the 2nd character.
" as the 3rd character.
".
", and press the
key to shift a digit.
" code next to the last
HXPRM10mnCT001E