(Skip) - Toho Electronics TRM-10C Instruction Manual

(7)

(Skip)

Setting SKIP on the Channel does not display and recording.
Example) When skipping Channel 6.
Display
[Note]
● Setting all the channels to Skip displays an error,
At least, one channel should be set to measurement.
● The skip channel conducts measurement, but does not provide display, print, or alarm judgment. If input is
not connected, short-circuit a measurement terminal.
● It is not possible to return it based on the setting skipped once. Please set range again.
Operation keys
ESC
Hold down the "MENU" key for 3 seconds or more
3sec
MENU
to enter the setup mode. Use the △ key to display
ENT
PRINT
"
Use the △ key to select the channel you want to set.
ENT
PRINT
Press the "ENT" key.
Use the △ key to select "
ENT
PRINT
"ENT" key.
Press the "ENT" key. Setting is completed.
ENT
To return to the user mode, hold down the "MENU"
key for 3 seconds or more.
―55―
Description
". Press the "ENT" key.
.
HXPRM10mnCT001E
". Press the