Toho Electronics TRM-10C Instruction Manual page 37

(2) List print stopping procedure
① Press the "PRINT" key.
② Use the "PRINT" key to display "
③ Use the "PRINT" key to select "
However, print operation continues until the line is completed. List print is stopped.
And the display returned to it was prior to starting list print.
Date and Time
for List Print
Chart Speed Set value. 2nd
Chart Speed (2) is effective
for DI function.
Print alarm set values
and relays.
Set values of the
comment print.
Effective with the
DI option.
", and press the "ENT" key.
" . Pressing the "ENT" key stops list print.
Dec.01.05 06:00
CHART SPEED (1)50mm／h
CH RANGE LEFT END
TAG NO. RIGHT END
1 10V -10.000V
10.000
2 10V -10.000V
ABCD 10.000
3 10V -10.000V
10.000
4 10V -10.000V
10.000
5 TYPE K -200.00℃
100.00
＊6 10V -10.000V
10.000
CH ALARM1 RLY
ALARM3 RLY
1 H 8.000
L -5.000
CH DIGITAL ZONE(mm)
1 ON 0-100
2 OFF 0- 50 80%
3 OFF 0-100
4 OFF 0-100
5 0N 50-100
6 OFF 0-100
COMMENT 1 = OPEN
2 =
3 =
Fig. 6.4 List Print
―36―
(2)100mm／h
SCALE LEFT
SCALE RIGHT
Prints Input range, Tag,
Measurement range, and
Scaling value for each
channel.
channel number is prefixed
by "＊".
ALARM2 RLY
ALARM4 RLY UNIT
V
PARTIAL
0.000V
Digital print ON/OFF, zone record,
and partial
compression/expansion set
value for each channel.
If skipped, the
HXPRM10mnCT001E