Toho Electronics TRM-10C Instruction Manual page 82

Example) When calibrating the span point.
Display Operation keys
Enter the engineering mode (See the key operation
ENT
in page 69). Use the △ key to display
ENT
PRINT
"
Use the △ key to select "
ENT
PRINT
"ENT" key.
The instrument starts to feed and print the chart
PRINT
FEED
paper. With the △ (left move) and
ENT
adjust the 100 mm position of the chart paper and
the recording position. Press the "ENT" key.
Display displays the set counter value.
Setting is completed. Returned to the Span Point
Calibration screen.
―81―
Description
", and press the"ENT" key.
", and press the
HXPRM10mnCT001E
(right move),