Toho Electronics TRM-10C Instruction Manual page 58

[Note]
When the "ENT" key is pressed in setting the alarm point. Display will be switched to the next setting display.
Setting hereinafter is valid only for the model to which an alarm output relay option has been attached.
If the option has not been set, press the "ENT" key until "
Then, press the "ENT" key once more. Setting is completed.
Display
[Note]
The tag setting does not effect on Alarm print setting. Prints channel numbers every time.
Operation keys
When an alarm occurs, issues the alarm output
ENT
PRINT
from the alarm output relay. Use the △ key to select
alarm output ON and press the "ENT" key.
If the alarm output is not used, select OFF and
press the "ENT" key.
If the alarm output is set to ON, set the relay number.
ENT
PRINT
Use the △ key to select the relay number out of 1 to
6, and press the "ENT" key.
Press the "ENT" key. Setting is completed.
ENT
When you want to continue to set for other channel,
press the △ key to select the channel, and start
setting. To return to the user mode, hold down the
"MENU" key for 3 seconds or more.
―57―
" is displayd.
Description
HXPRM10mnCT001E