(Printing Cycle); (Zone Recording) - Toho Electronics TRM-10C Instruction Manual

(1)

(Printing Cycle)

Example) When setting the printing cycle to 60 seconds.
Display
(2)

(Zone Recording)

Example) When setting the instrument so that Channel 1 zero/span will be recorded at the position of
20 to 50 %.
Display
(Setting of Left-end Position)
(Setting of Right-end Position)
[Note]
If you enter an incorrect numeral, displays errors
Press the "ENT" key and re-enter a correct numeral.
Operation keys
ESC
Hold down the "MENU" key for 3 seconds or more
3sec
MENU
to enter the setup mode. Use the △ key to display
ENT
PRINT
"
Use the △ key to display "
ENT
PRINT
the "ENT" key.
Use the △ key to select the printing cycle "
ENT
PRINT
and press the "ENT" key.
Press the "ENT" key. Setting is completed.
ENT
To return to the user mode, hold down the "MENU"
key for 3 seconds or more.
Operation keys
ESC
Hold down the "MENU" key for 3 seconds or more
3sec
MENU
to enter the setup mode. Use the △ key to display
ENT
PRINT
"
Use the △ key to display "
ENT
PRINT
"ENT" key.
Use the △ key to select the channel you want to set,
ENT
PRINT
and press the "ENT" key.
Set a zero point printing position in percentage (%).
PRINT
FEED
Use the △ key to select a numeral, and use the
ENT
key to shift a digit. Press the "ENT" key.
Set a span printing position in percentage (%).
PRINT
FEED
Operate in the same manner as setting the zero
ENT
point printing position.
Press the "ENT" key. Setting is completed.
ENT
To return to the user mode, hold down the "MENU"
key for 3 seconds or more.
―64―
Description
", and press the "ENT" key.
Description
", and press the "ENT" key.
or
HXPRM10mnCT001E
", and press
",
", and press the
.