Setting The Unit - Toho Electronics TRM-10C Instruction Manual

7.1.3 Setting the Unit

Setting Items
Set the unit for each channel.
[Note]
If you change the unit in the range of
Operation
Setting Channel
Example) Setting the unit(℃) for Channel 1.
Display
(Code No.)
[Note]
The unit setting effects only when the range setting is
(including ,
When the range setting is others, the unit sets appropriate unit for the range automatically.
,
Char. No.
・
・
・
・
Operation keys
ESC
Hold down the "MENU" key for 3 seconds or more
3sec
MENU
to enter the setup mode. Use the △ key to display
ENT
PRINT
Use the △ key to select the channel you want to set.
ENT
PRINT
Then, press the "ENT" key.
Use the △ or
PRINT
FEED
the code number, and press the "ENT" key.
ENT
See Characters Code Table on the next page.
Set the 2nd character in the same manner.
PRINT
FEED
ENT
When the number of unit characters is less than 6,
PRINT
FEED
enter a code(
ENT
Press the "ENT" key. Setting is completed.
ENT
To return to the user mode, hold down the "MENU"
key for 3 seconds or more.
and selected
―58―
or , setting the range to
Code No.
（゜）
（C）
End
Description
". Then, press the "ENT" key.
"
key to select the 1st character of
) to end. Press the "ENT" key.
,
as the reference channel).
.
or
HXPRM10mnCT001E