Engineering List Print - Toho Electronics TRM-10C Instruction Manual

6.4.3 Engineering List Print

Engineering list print provides the following setting data of the instrument on the chart paper.
Analog recording
Digital printing
Burnout/RJC etc.
(1) Engineering list print operating procedure
① Press the "MENU" key.
② Use the "PRINT" key to display "
③ Use the "PRINT" key to select "
list print.
Once engineering list print starts, the display is automatically returned to the Data Display screen.
Upon termination of engineering list print, it is returned to it was prior to starting engineering list print.
[Note]
① Analog recording is interrupted while engineering list print is running.
However, measurement/alarm detection remains effective.
② If an alarm is activated while engineering list print is running, alarm print will be performed when
recording restarts.
", and press the "ENT" key.
". Pressing the "ENT" key executes engineering
―37―
HXPRM10mnCT001E