Logging Print Synchronous/Asynchronous; Setting The Communication Function - Toho Electronics TRM-10C Instruction Manual

(6) Record Start/End Print OFF/SYNC/ASYNC
Set start/end print to OFF/Synchronous print/Asynchronous print.
Example) When setting start/end print to asynchronous print.
Display

7.2.7 Setting the Communication Function

Set Protocol ,Local Address, Baud Rate (communication speed), Data Length, Parity Bit,
and Stop Bit.
Example) Original protocol, Local Address: 02, Baud Rate: 1200bps, Data Length: 7 bit,
Parity Bit: even, Stop Bit: 2 bit.
Display
(Protocol)
(Local address)
(Baud rate)
(Data length)
(Parity bit)
(Stop bit)
［Note］
In the case of "
Operation keys
ENT
ENT
PRINT
ENT
PRINT
PRINT ENT
Operation keys
ENT
ENT
PRINT
ENT
PRINT
ENT
PRINT
PRINT ENT
ENT
PRINT
PRINT ENT
ENT
PRINT
（Modbus-RTU）", Please set always the data length "
―78―
Description
Enter the engineering mode (See the key operation
in page 69). Use the △ key to display
", and press the "ENT" key.
"
Use the △ key to select "
"ENT" key.
Use the △ key to display "
the "ENT" key.
Setting is completed. Returned to the Record start/
end print Setting screen.
Description
Enter the engineering mode (See the key operation
in page 69). Use the △ key to display
" ", and press the "ENT" key.
Use the △ key to display "
the "ENT" key.（Select from "
" （Modbus-RTU）"）
Use the △ key to display "
the "ENT" key.
(Select from
Use the △ key to display "
"ENT" key. （Select from 1200, 2400, 4800, 9600,
19200, 38400）
Use the △ key to display "
"ENT" key.（Select from 7 bit, 8 bit）
Use the △ key to display "
"ENT" key. (Select from EVEN, ODD and NONE）
Use the △ key to display "
"ENT" key. (Select from 1 bit, 2 bit)
Setting is completed. Returned to the
Communication Function Setting screen.
", and press the
", and press
", and press
（Original）",
", and press
～
)
", and press the
", and press the
", and press the
", and press the
".
HXPRM10mnCT001E