(Tag) - Toho Electronics TRM-10C Instruction Manual

(5)

(Tag)

Example) When setting "ABCD" for Channel 1.
Display
(Setting of 1st Character)
(Setting of 2nd Character)
(Setting of 3rd Character)
(Setting of 4th Character)
(Setting of 5th Character)
[Note]
When the number of tag characters is less than 7, set the "
59 for Character Code Table.
Operation keys
ESC
Hold down the "MENU" key for 3 seconds or more
3sec
MENU
to enter the setup mode. Use the △ key to display
ENT
PRINT
"
Use the △ key to display "
ENT
PRINT
"ENT" key.
Use the △ key to select the channel you want to set,
ENT
PRINT
and press the "ENT" key.
Set "
PRINT
FEED
select a code, and use the
ENT
Press the "ENT" key.
PRINT
FEED
ENT
PRINT
FEED
ENT
PRINT
FEED
ENT
Set "
PRINT
FEED
"ENT" key.
ENT
Press the "ENT" key. Setting is completed.
ENT
To return to the user mode, hold down the "MENU"
key for 3 seconds or more.
―67―
Description
", and press the "ENT" key.
" as the 1st character. Use the △ key to
Set the 2nd through 4th characters in the
same manner.
" as the 5th character and press the
" code next to the last characters. See page
", and press the
key to shift a digit.
HXPRM10mnCT001E