Changing The Display; Auto Display; Manual Display; Date Display - Toho Electronics TRM-10C Instruction Manual

6.5 Changing the Display

Display selection procedure
① Press the "MENU" key to display "
② Use the "PRINT" key to select a required display screen from the menu below.
Press the "ENT" key.
③ " □" is displayd in case of manual display. Use the "PRINT" key to select the channel number.
Press the "ENT" key.
" "(AUTO)
" "(MAN)
" "(DATE)
" "(TIME)
" "(OFF)
＜Auto Display＞
6.5.1
Displays the process variable of each channel sequentially at intervals of 2.5 seconds.
Channel Number (1-digit)
H : Upper-limit Alarm
L : Lower-limit Alarm
＜Manual Display＞
6.5.2
Displays the process variable of specific channel, it updates every measurement cycle.
The data is the same as Auto display. Pressing the "ENT" key changes the displayd channel number
(it increments).
＜Date Display＞
6.5.3
Displays the month and day. Leap year adjustment is automatic.
Example of October 18
＜Time Display＞
6.5.4
Displays hour and minute.
Example of 12:15
＜Display Off＞
6.5.5
Turns off the process variable display. Key operation is the same as usual. To switch to other display,
take steps ① through ③ mentioned above.
", and press the "ENT" key.
：Auto display
：Manual display
：Date display
：Time display
：Display off
Ｈ
Variable (5-digt)
Process
Month
Hour
―41―
Day
Minute
HXPRM10mnCT001E