When There Is A Big Error; When The Trend Recording Deflected - Toho Electronics TRM-10C Instruction Manual

10.1.3 When there is a Big Error

Flow chart 2
Big error
Display or print
value matching dot
prints value?
ＹＥＳ
Calibration
corrects?
ＹＥＳ
Scaling set
properly?
ＹＥＳ
Contact our dealer where you purchased
the instrument, or our sales representative.

10.1.4 When the Trend Recording Deflected

Flow chart 3
Trend Recording Deflected (0 or 100%)
Input signal wiring
correct?
ＹＥＳ
Value and sign
(+/-) of input
correct ?
ＹＥＳ
Range and scale
set properly
ＹＥＳ
Contact our dealer where you purchased
the instrument, or our sales representative.
(Dot point error)
ＮＯ
initialized to the factory
default calibration value.
(See 7.2.8 on Page 79)
ＮＯ
Calibrate again
(See 9.5 on Page 99)
ＹＥＳ
ＮＯ
Set properly
(See 7.1.1 on Page 48)
ＮＯ
(Sensor disconnection, etc)
ＮＯ
ＮＯ
―103―
Calibrate
zero/span of chart
paper properly?
Wire correctly
(See 4.2
on Page 17 to 19)
Apply a correct input
(See 4.2
on Page 17 to 19)
Set correctly
(See 7.1.1 on Page 45)
ＮＯ
Calibrate again
(See 7.2.11 on
Page 80)
HXPRM10mnCT001E