Alarm Hysteresis; Burnout On/Off; Channel Offset - Toho Electronics TRM-10C Instruction Manual

7.2.1 Alarm Hysteresis

Setting 0.5 % hysteresis to the values at alarm activation and alarm recovery is possible. (Common to
all the alarms)
Example) When turning off alarm hysteresis.
Display

7.2.2 Burnout ON/OFF

Setting Burnout High (to deflect the recording over the span) for each channel is possible.
Example) When setting Burnout High for Channel 4.
Display

7.2.3 Channel Offset

For channel offset setting, set the value to be added to an actual process variable.
Example) When setting the value (3.0) to be added to Channel 3.
Display
Operation keys
Enter the engineering mode (See the key operation
ENT
in page 69). Use the △ key to display
ENT
PRINT
"
Use the △ key to display "
ENT
PRINT
"ENT" key.
Operation keys
Enter the engineering mode (See the key operation
ENT
in page 69). Use the △ key to display
ENT
PRINT
"
Use the △ key to display "
ENT
PRINT
"ENT" key.
Use the △ key to select "
ENT
PRINT
"ENT" key.
Operation keys
Enter the engineering mode (See the key operation
ENT
in page 69). Use the △ key to display
ENT
PRINT
"
Use the △ key to select "
ENT
PRINT
"ENT" key.
Use the △ key to alter a sign/numerical value or
PRINT
FEED
shift a decimal point. Use the
ENT
Once the numerical value is decided, press the
"ENT" key.
―72―
Description
", and press the "ENT" key.
Description
", and press the "ENT" key.
Description
", and press the "ENT" key.
key to shift a digit.
HXPRM10mnCT001E
", and press the
", and press the
", and press the
", and press the