Toho Electronics TRM-10C Instruction Manual page 50

(Zero-side scale value) (＊1)
(Decimal point)
(Span-side scale value) (＊2)
[Note]
An entry of an incorrect numeral displays errors
Press the "ENT" key and re-enter a correct numeral.
Use the △ key to select a numeral.
PRINT FEED
Use the
Press the key again in the lowest digit(right end) to
FEED PRINT
blink a decimal point. Use the △ key to select a
ENT
decimal point position. Press the "ENT" key.
Use the △ key to select a numeral.
PRINT FEED
Use the
ENT
Press the "ENT" key. Setting is completed.
ENT
To return to the user mode, hold down the "MENU"
key for 3 seconds or more.
―49―
key to shift a digit.
key to shift a digit. Press the "ENT" key.
or or
HXPRM10mnCT001E
.