Comment Words - Toho Electronics TRM-10C Instruction Manual

(5) Comment Words）
Example) When setting "ON" for Comment 1(
Display
（Setting of 1st Character）
（Setting of 2nd Character）
（Setting of 3rd Character）
（Setting of 9th Character）
（Setting of 10th Character）
（Setting of 11th Character）
（Setting of 12th Character）
［Note］
● When the number of comment characters is less than 12, set the "
characters. See Page 68 for Character Code Table.
● The digit is not indicate after setting the "
● The comment setting is not effective without the DI option. Do not set the comment setting.
Operation Keys
ESC
Hold down the "MENU" key for 3 seconds or more
3 sec
MENU
to enter the setup mode. Use the △ key to indicate
ENT
PRINT
"
Use the △ key to indicate "
ENT
PRINT
"ENT" key.
Use the △ key to select a comment number.
ENT
PRINT
Indicate "
Set "
PRINT
FEED
key to select a code, and use the
ENT
digit. Press the "ENT" key.
Set "
PRINT
FEED
Operate in the same manner as setting the 1st
ENT
character to end.
Set "
PRINT
FEED
Operate in the same manner as setting the 1st
ENT
character to end.
Repeat setting for each channel.
Press the "ENT" key. Setting is completed. To
ENT
return to the user mode, hold down the "MENU"
key for 3 seconds or more.
".
―77―
)
Description
", and press the "ENT" key.
" and press the "ENT" key.
" as the 1st character to end. Use the △
" as the 2nd character to end.
" as the 3rd character to end.
" code next to the last
", and press the
key to shift a
HXPRM10mnCT002E