List Print - Toho Electronics TRM-10C Instruction Manual

(2) Manual print stopping procedure
① Press the "PRINT" key.
② Use the "PRINT" key to display "
③ Use the "PRINT" key to select "
However, print operation continues until the line is completed. Manual print is stopped.
And the display returned it was prior to starting manual print.
Nov.12.06 11:08
1: 11.25mV
3: 0.07mV
–1.12mV
5:

6.4.2 List Print

Print the following setting data of the instrument on the paper:
Date/time/Chart speed/2nd chart speed/Printing cycle.
Channel number/range/scaling value/engineering unit
Setting alarm type
(1) List print operating procedure
① Press the "PRINT" key.
② Use the "PRINT" key to display "
③ Use the "PRINT" key to select "
Once list print starts, the display is automatically returned to the Data Display screen.
Upon termination of list print, it is returned to it was prior to starting list print.
[Note]
① Analog recording is interrupted while list print is running. However, measurement/alarm
detection remains effective.
② If an alarm is activated while list print is running, alarm print will be performed when recording
restarts.
" , and press the "ENT" key.
" . Pressing the "ENT" key stops manual print.
2: 0.45mV
–0.00mV
4:
–0.39mV
6:
Fig. 6.3 Manual Print
", and press the "ENT" key.
". Pressing the "ENT" key executes list print.
―35―
HXPRM10mnCT001E