Record Start/End Print; Di Manual Print; Di Date/Time Print - Toho Electronics TRM-10C Instruction Manual

6.4.4 Record Start/End Print

Record Start/End print the beginning (or ending) time on the chart paper when beginning (or ending)
to record. Record Start/End operation is set in the engineering mode. (Refer to 7.2.6 "Record
start/end print" )
" " ·········· Record start print is synchronous print.
" " ······· Record start/end print is asynchronous print.
" " ············· Record start/end print is not done. .
(1) Record start print
When the record begins, the recorder prints the start time.
(2) Record end print
When the record is ended, the recorder prints the end time.
[Note]
When the record operation is not a key but DI, the print is done by the operation by DI.
6.4.5 DI Manual Print (option)
DI manual print prints measurements and time on paper by turning on DI.
The content of the print is the same as 6.4.1 "Manual Print".
(1)"DI function" of the engineering mode is set.
Please refer to 7.2.9 " DI Functions " for details.
" " ······· Manual print is synchronous print.
" " ······· Manual print is asynchronous print.
(2)DI is operated.
DI manual print is printed by turning on DI.
6.4.6 DI Date/Time Print (option)
DI Date/Time print prints date and time on paper by turning on DI.
(1)"DI function" of the engineering mode is set.
Please refer to 7.2.9 "DI Functions" for details.
" " ······· Date/Time print is synchronous print.
" " ······· Date/Time print is asynchronous print.
(2)DI is operated.
DI manual print is printed by turning on DI.
Record end print is asynchronous print.
―39―
HXPRM10mnCT001E