Tag - Toho Electronics TRM-10C Instruction Manual

(4) Tag）
Example) When setting "AB" for Channel 1
Display
（Setting of 1st Character）
（Setting of 2nd Character）
（Setting of 3rd Character）
［Note］
When the number of tag characters is less than 5, set the "
See Page 68 for Character Code Table.
Operation Keys
ESC
Hold down the "MENU" key for 3 seconds or more
3 sec
MENU
to enter the setup mode. Use the △ key to indicate
ENT
PRINT
"
Use the △ key to indicate "
ENT
PRINT
"ENT" key.
Use the △ key to select the channel you want to set,
ENT
PRINT
and press the "ENT" key.
Set "
PRINT
FEED
key to select a code, and use the
ENT
digit. Press the "ENT" key.
Set the 2nd character to end in the same manner.
PRINT
FEED
ENT
Set "
PRINT
FEED
"ENT" key.
ENT
Press the "ENT" key. Setting is completed.
ENT
To return to the user mode, hold down the "MENU"
key for 3 seconds or more.
―76―
Description
", and press the "ENT" key.
" as the 1st character to end. Use the △
" as the 3rd character to end and press the
" code next to the last characters.
", and press the
key to shift a
HXPRM10mnCT002E