Table of Contents
Advertisement
6
Introduction
General Safety Precautions
Fan Module
System
Maintenance
Fiber Optic Cable
Environmental
Specifications
Using This Guide
Electrical Safety Precautions
Version 1.0
This chapter provides an overview of the recommended safety precautions for
installing the Acme Packet 4500.
Before you install your Acme Packet 4500, we recommend that you review the
contents of this chapter and the
information intended to protect you and your Acme Packet 4500 from experiencing
any harm during the installation process. These chapters also provide information
that helps to keep your Acme Packet 4500 functioning properly and keep it from
damage.
To ensure general safety, follow the safety precautions listed in this section.
To avoid overheating the system, do not block the air inlets or the fan module, or
otherwise obstruct airflow to the system. Keep the area around the Acme Packet
4500 clean and clutter-free.
Aside from the fan module, power supply, and NIUs, there are no user-serviceable
parts inside the Acme Packet 4500 chassis. Only professionals trained to maintain,
adjust, or repair the Acme Packet 4500 may provide these services.
Looking into a fiber optic cable can cause eye damage. Never look directly into the
end of the fiber optic cables. Instead, use a fiber optic power meter to determine if
power is present.
Adhere to the
"Environmental
this guide.
Read and understand all notes of warning and caution included in the Acme Packet
4500 documentation. These warnings and cautions are designed to keep you safe
and protect the Acme Packet 4500 from damage.
To protect yourself from harm and the Acme Packet 4500 from damage, follow these
electrical safety precautions:
System Installation
chapter. Both chapters provide
Specifications" section in the
Acme Packet 4500 Hardware Installation Guide 101
Safety
Specifications
chapter of
Advertisement
Table of Contents
