Safety; Introduction; Environmental, Safety, And Regulatory Certifications; General Safety Precautions - Oracle Acme Packet 4600 Hardware Installation And Maintenance Manual

1

Introduction

Environmental, Safety, and Regulatory Certifications

General Safety Precautions

Fan Module
System
Maintenance
Fiber Optic Cable
Environmental
Specifications
Acme Packet 4600 Hardware Installation and Maintenance Guide
This chapter provides an overview of the recommended safety precautions for
installing the Acme Packet 4600 System.
Before you install your Acme Packet 4600 System, Oracle recommends that you
review the contents of this chapter and the Installation chapter. Both chapters
provide information intended to protect you and your Acme Packet 4600 System
from experiencing any harm during the installation process. These chapters also
provide information that helps to keep your Acme Packet 4600 System functioning
properly and prevent damage.
For information regarding safety and regulatory certifications applicable to the Acme
Packet 4600, refer to the Acme Packet Platforms Safety and Compliance Guide.
To ensure general safety, follow the safety precautions listed in this section.
To avoid overheating the system, do not block the air inlets or the fan module, or
otherwise obstruct airflow to the system. Keep the area around the Acme Packet
4600 System clean and clutter-free.
Aside from the fan module, power supply, air filter and NIUs, there are no user-
serviceable parts inside the Acme Packet 4600 System chassis. Only professionals
trained to maintain, adjust, or repair the Acme Packet 4600 System may provide
these services.
Looking into a fiber optic cable can cause eye damage. Never look directly into the
end of the fiber optic cables. Instead, use a fiber optic power meter to determine if
power is present.
Adhere to the stated environmental specifications for the Acme Packet 4600.

Safety

9