Table of Contents
Advertisement
SYSTEM INSTALLATION
46 Acme Packet 4500 Hardware Installation Guide
•
Ensure that the Acme Packet 4500 chassis remains supported until you have
completely installed it into the equipment rack.
To install the Acme Packet 4500 chassis in the equipment rack:
1.
Lift the Acme Packet 4500 into the correct position in the equipment rack.
2.
Insert the chassis slides into the stationary slides.
3.
Push the Net-Net 4500 fully into the equipment rack.
4.
Line up the chassis-mounted thumb screws with the threads on the mounting
spacer. You may have to adjust the spacer locations before they line up with the
Acme Packet 4500's captive screws.
5.
Once correctly positioned, screw the thumb screws into the mounting spacer
and secure the chassis in the rack.
6.
Fully tighten all 4, 10-32 x 5/8" front screws that hold the stationary rails to the
rack.
Version 1.0
Advertisement
Table of Contents
Need help?
Do you have a question about the Acme Packet 4500 and is the answer not in the manual?
Questions and answers