Battery Warning; Esd Safety - Oracle Acme Packet 4500 Hardware Installation Manual

SAFETY
Precautions

Battery Warning

Caution:
Caution:

ESD Safety

102 Acme Packet 4500 Hardware Installation Guide
Note the locations of the power supply switches on the Acme Packet 4500, and
•
the location of the emergency power-off switch for the room where the Acme
Packet 4500 is located.
If an electrical accident occurs, remove power from the system immediately by
•
unplugging the chassis.
• Always disconnect the power from the system when removing a Acme Packet
4500 from its rack.
When disconnecting power:
•
Turn the power supply switches to the OFF position.
•
Disconnect the circuit breaker at the rack.
•
Unplug or unscrew the power cords from the power supplies.
•
Use grounded AC power cords that are plugged into grounded electrical outlets.
•
Never use extension cords to power a Acme Packet 4500.
•
Ensure that the installation facilities have proper grounding systems and include
•
a grounded rack structure or local grounding bus bar.
When installing the Acme Packet 4500 in an equipment rack, always make the
•
ground connection first and disconnect it last upon un installation.
Use shielded Category 5e or 6, RJ45 cables for all 10/100/1000 Ethernet
•
connections to protect the Acme Packet 4500 from potential damage.
To avoid making a complete circuit (which causes electrical shock), use only one
•
hand when working with powered-on electrical equipment.
Use caution when using electrically conductive tools around the Acme Packet
•
4500.
Remove jewelry before working on the Acme Packet 4500.
•
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE. DISPOSE OF USED BATTERY ACCORDING
TO THE INSTRUCTIONS.
Perchlorate Material—Special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate.
To protect the Acme Packet 4500's delicate electronic components from damage
from static electricity, always follow the appropriate ESD procedures and wear the
proper protective devices (such as an ESD wrist strap) when handling any and all
Acme Packet 4500 hardware and while performing any Acme Packet 4500 hardware
procedures.
Version 1.0