Table of Contents
Advertisement
Version 1.0
To remove a power supply from the Acme Packet 4500 chassis:
1.
Remove the AC or DC power cables (see:
from the power supplies.
2.
Turn the locking screw fully counterclockwise to unlock the power supply from
the chassis. This may require 4-6 full turns.
3.
Hold the removal handle and gently pull the power supply out of the power
supply bay.
4.
Continue to pull the power supply all the way out of the chassis until you have
completely removed it.
MAINTENANCE
Ground and Power Cable
Acme Packet 4500 Hardware Installation Guide 77
Installation)
Advertisement
Table of Contents
Need help?
Do you have a question about the Acme Packet 4500 and is the answer not in the manual?
Questions and answers