Safety; Environmental, Safety, And Regulatory Certifications; General Safety Precautions; Fan Module - Oracle Acme Packet 3900 Hardware Installation And Maintenance Manual

Table of Contents

Safety

This chapter provides an overview of the recommended safety precautions for

installing the Acme Packet 3900 System.

Before you install your Acme Packet 3900 System, Oracle recommends that you

review the contents of this chapter and the Installation chapter. Both chapters

provide information intended to protect you and your Acme Packet 3900 System from

experiencing any harm during the installation process. These chapters also provide

information that helps to keep your Acme Packet 3900 System functioning properly

and prevent damage.

For information regarding safety and regulatory certifications applicable to the Acme

Packet 3900, refer to the Acme Packet Platforms Safety and Compliance Guide.

To ensure general safety, follow the safety precautions listed in this section.

To avoid overheating the system, do not block the air inlets or the fan module, or

otherwise obstruct airflow to the system. Keep the area around the Acme Packet 3900

System clean and clutter-free.

Aside from the fan module, power supply, air filter, transcode module, and TDM

module, there are no user-serviceable parts inside the Acme Packet 3900 System

chassis. Only professionals trained to maintain, adjust, or repair the Acme Packet

3900 System may provide these services.

Looking into a fiber optic cable can cause eye damage. Never look directly into the

end of the fiber optic cables. Instead, use a fiber optic power meter to determine if

power is present.

Adhere to the stated environmental specifications for the Acme Packet 3900.

1-1

Table of Contents