Table of Contents
Advertisement
GRAPHIC DISPLAY
ENVIRONMENT
RETURN
Graphic Display Output for HA Nodes
Initial State Displays
30 Acme Packet 4500 Hardware Installation Guide
5.
Press the Up or Down button to scroll to the RETURN selection.
6.
Press the Enter button to return to the Top Menu
The ENVIRONMENT display allows you to view information about the hardware's
operational status. The graphic display presents the following information in the
order listed:
Screen 1—Hardware alarms and Link Alarms:
•
HW ALARM : 0
LINK ALARM : 2
Screen 2—System temperature and fan speeds:
•
TEMPERATURE: 38.00 C
FAN SPEEDS:
100% 100% 100% 100%
Screen 3—System voltages:
•
VOLTAGES (V):
1.099, 1.186
1.488, 1.790
2.458, 3.278, 4.982
To use the ENVIRONMENT menu in the graphic display:
1.
From the top menu of the graphic display, press the Enter button.
Press the Up or Down buttons to scroll to the ENVIRONMENT selection.
2.
3.
Press the Enter button. The ENVIRONMENT information is displayed.
4.
Press the Up or Down button to scroll to the RETURN selection.
5.
Press the Enter button to return to the Top Menu
Pressing the Enter button for the RETURN selection returns you to the base display
during normal operating conditions or to the alarm display during an alarm
condition.
The information included in this section only applies to high availability Acme
Packet 4500 nodes. The graphic display on a Acme Packet 4500 in an HA node
indicates the current HA state. Five state indications can be displayed on the graphic
display. Only the Standby and Active state indications appear in the graphic display
for more than a few seconds. An explanation and example of each HA state follows.
The following example shows the output in the graphic display window of a Acme
Packet 4500 in the initial state.
NET - NET
SESSION DIRECTOR (I)
Version 1.0
Advertisement
Table of Contents
