2.5
Ethernet Communication
Ethernet
2.5.1
2.5.1.1
Function Description
The device has a 100Base-T Ethernet port (RJ45 connectors) at the top side of the device. The Ethernet port
can be configured to be an Ethernet network with 1 MAC and 1 IP address.
2.5.1.2
Configuration via the User Interface
Configuration of the Communication Ethernet
To change the Ethernet communication settings in the Configuration tab, proceed as follows:
•
In the navigation window, click Communication Ethernet.
[sc_q100_communication ethernet, 3, en_US]
Figure 2-16
•
Configure the respective parameters according to the following table.
Table 2-8
Parameter
Communication Ethernet
11
IP address
Subnet mask
11
Default gateway
Ethernet switch on
11
After the parameter changes have been enabled, the device will reset.
SICAM, SICAM Q100 7KG95xx, Manual
E50417-H1040-C522-A9, Edition 06.2021
Configuration Tab, Ethernet Settings
Settings for Communication Ethernet
Default Setting
192.168.0.55
255.255.255.0
192.168.0.1
11
No
Basic Functions
2.5 Ethernet Communication
Setting Range
Any
0.0.0.0 = DHCP
Any
Any
No
Yes
47