Siemens SICAM Q100 7KG95 Series Manual page 132

Process Connections
4.4 SICAM Subdevices
Parameter
Parameter: Source of output 1-
N
Indication: Input 1-N
Parameter: Source of output 2-
N
Indication: Input 2-N
Parameter: Source of output 3-
N
Indication: Input 3-N
Parameter: Source of output 1-P
Indication: Input 1-P
Parameter: Source of output 2-P
Indication: Input 2-P
Parameter: Source of output 3-P
Indication: Input 3-P
•
After the parameterization, click Send.
•
In the navigation window, click Activation and cancel.
•
Click Activation.
NOTE
i
i
Indication 1 from remote and Indication 2 from remote are provided for controlling the two binary
outputs of the SICAM Q100. Therefore, Indication 3 from remote is the first assigned indication as Source
of output of the SICAM subdevices.
The factory settings of the Source of output x parameters are controllable indications, for example, Indica-
tion 3 from Remote, and can be controlled via the Modbus TCP or IEC 61850 protocol. You can also set an
internal indication from the SICAM Q100 in the list box.
If 1 or 2 SICAM I/O Units have been selected as the subdevices, the indications on the status of the binary
inputs of these devices are also available in the group indications, the indications of the LEDs, and the indica-
tions of the binary outputs.
NOTE
i
i
For the configuration of the SICAM I/O Unit 7XV5673, refer to th device manual of the SICAM I/O Unit
7XV5673 (E50417-H1040-C484).
Value View of the SICAM Subdevices
To display the values of the SICAM Subdevices in the Value view tab, proceed as follows:
•
In the navigation window, click SICAM Subdevices.
132
Default Settings
Indication 9 from Remote
Binary inp. 1-N SICAM IO
1
Indication 10 from
Remote
Binary inp. 2-N SICAM IO
1
Indication 11 from
Remote
Binary inp. 3-N SICAM IO
1
Indication 12 from
Remote
Binary inp. 1-P SICAM IO 1
Indication 13 from
Remote
Binary inp. 2-P SICAM IO 1
Indication 14 from
Remote
Binary inp. 3-P SICAM IO 1
Setting Range
Parameter:
Indication: any, max. 31 characters
Parameter Source of output:
Selection which indication is transmitted from
SICAM Q100 to the binary output of the SICAM
I/O Unit 7XV5673.
Indication Input:
Designation of the indication which shows the
status of the binary input of SICAM I/O Unit
7XV5673.
SICAM, SICAM Q100 7KG95xx, Manual
E50417-H1040-C522-A9, Edition 06.2021