Commissioning and First Steps
11.13 Operation via Display
11.13
Operation via Display
General Operating Instructions
11.13.1
A restricted operation via the display of the device is possible with the softkeys.
The front softkeys F1 to F4 are used to set parameters, select measurands, and enter various settings.
The following table lists the icons which appear on the display when the softkeys are pressed.
Table 11-4
Softkey Functions
General Softkey Functions
Displaying the RMS value
Canceling an action and returning to the action
displayed previously
Displaying the maximum value
Displaying the minimum value
Scrolling up
Scrolling down
Menu selection
Acknowledging the selection
Special Softkey Functions
Displaying the table of the value
Displaying the graph
Displaying additional information
Active energy supply
Active energy consumption
Inductive reactive energy
Capacitive reactive energy
Scrolling left
Scrolling right
Displaying the next additional information
Switching to edit mode
312
Control Functions of the Softkeys
F1
F2
F3
SICAM, SICAM Q100 7KG95xx, Manual
E50417-H1040-C522-A9, Edition 06.2021
F4