Operation Via Pc; General Usage Notes; Start And Design Of The User Interface; Initial Start Of The Operation - Siemens SICAM Q100 7KG95 Series Manual

Commissioning and First Steps

11.12 Operation via PC

11.12 Operation via PC

General Usage Notes

11.12.1
The device can be operated with HTML pages via the connected PC. Additionally, limited operation of the
device is possible with softkeys on the display side in connection with the display.
The graphical user interface is stored in the device. To display the user interface, start the Web browser and
enter the IP address of the device.
You can navigate via Web browser using the icons on the toolbar, for example back, forward, print. The user
interface itself does not contain any navigation icons.
Operating actions are performed with the mouse. Parameters and text are entered using the keyboard.
Table 11-3
Control Element
NOTE
i
i
At the beginning of the parameterization, first set the Network type according to chapter
tion via the User
values, and limiting values for inconsistencies after activating the device. Check also the ICD/IID file which
is suitable for the network type. If there are invalid values or a wrong ICD/IID file, restart the device.
NOTE
i
i
If you change settings in tabs, click Send on each tab to confirm the new setting. The settings have to be
activated after the entire parameterization has been completed.

Start and Design of the User Interface

11.12.2
11.12.2.1

Initial Start of the Operation

Before starting the user interface, the following preconditions must be met:
•
Assemble the device as described in chapter
•
Connect the lines for measurement, communication, and supply voltage as described in the chapters
11.5 Electrical
•
Oobserve the safety notes.
302
Control Functions
Interface. If you change the Network type during operation, check all settings, measured
Connection, 11.6 Communication
Control Function
Option button: selects one option
List box: selects an item from a list
Button: Executing an action by clicking the button, that is the
current settings on the user interface are transmitted to the
device.
Active tab (light blue)
Inactive tab (dark blue)
Selects and opens the item to be activated, for example a tab
11.3 Assembly.
Connections, and
2.4.1 Configura-
11.7 Binary Connections.
SICAM, SICAM Q100 7KG95xx, Manual
E50417-H1040-C522-A9, Edition 06.2021