Commissioning and First Steps
11.1 Safety Notes
11.1
Safety Notes
!
DANGER
Hazard due to high voltage
Non-observance will lead to death or serious injury.
Work may only be carried out by trained personnel who are familiar with and observe the safety require-
ments and precautions.
Work may never be carried out if there is any hazardous voltage present.
²
De-energize the device.
²
Isolating device: Connect a suitable isolating device upstream to de-energize the device. The isolating
²
device must be installed near the device, it must be easily accessible to the user and it must be marked
as an isolating device for the device.
Secure the supply voltage with an approved (UL/IEC) fuse: 1.6 A, type C.
²
If a melting fuse is used, a suitable approved (UL/IEC) fuse holder has to be used.
²
NOTE
i
i
For electrical installations you have to observe and comply with the national and international provisions
concerning the installation of electric power installation and the low-voltage directive 2006/95/EG.
276
SICAM, SICAM Q100 7KG95xx, Manual
E50417-H1040-C522-A9, Edition 06.2021