Siemens SICAM Q100 7KG95 Series Manual page 153

Parameter
Synchronization source
Kind of used reactive power
NOTE
i
i
Changing the number and length of the subperiods deletes the load-profile buffer.
If a binary input is used as synchronization source, its properties must be configured (see chapter
4.2.2 Configuration and Value View via the User
•
After the parameterization, click Send.
•
In the navigation window, click Activation and cancel.
•
Click Activation.
Value View of the Load Profile
To display the values of the load profile in the Value view tab, proceed as follows:
•
In the navigation window, click Load profiles.
SICAM, SICAM Q100 7KG95xx, Manual
E50417-H1040-C522-A9, Edition 06.2021
Default Setting
Internal clock
Q1
Interface.
Setting Range
None
Protocol
Binary input 1 to 2
Internal clock
Q1
Qn
Qtot
Energy Management
6.2 Load Profile
153