6.6
Energy Freeze and Reset
Function Description
6.6.1
The function of Energy Freeze and Reset is used to configure the freezing interval for the energy values.
After a time interval is configured, the energy values are frozen and not updated during the interval until the
next interval starts. The frozen values are transmitted by the report function and the IEC 61850 protocol in the
MMTN/MMTR logic node.
Configuration and Value View via the User Interface
6.6.2
Configuration of the Energy Freeze and Reset
To change the settings of the energy freeze and reset in the Configuration tab, proceed as follows:
•
In the navigation window, click Energy freeze and reset.
[sc_Configure_snapshot-energy, 3, en_US]
Figure 6-15
•
Configure the respective parameters according to the following table.
Table 6-7
Parameter
Interval
•
After the parameterization, click Send.
•
In the navigation window, click Activation and cancel.
•
Click Activation.
Value View of the Frozen Energy
To display the values of the frozen energy in the Value view tab, proceed as follows:
•
In the navigation window, click Frozen energy.
SICAM, SICAM Q100 7KG95xx, Manual
E50417-H1040-C522-A9, Edition 06.2021
Configuration Tab, Energy Freeze and Reset
Settings for Energy Freeze and Reset
Default Setting
15 min
6.6 Energy Freeze and Reset
Setting Range
10 min, 15 min, 30 min, 60 min
Energy Management
165