Siemens SICAM Q100 7KG95 Series Manual page 69

To change the Modbus RTU Master settings in the Configuration tab, proceed as follows:
•
In the navigation window, click Communication serial and select Modbus RTU master as the Bus
protocol.
[sc_ Q100_configure_Modbus_RTU_Master_US, 2, en_US]
Figure 2-32
•
Configure the respective parameters according to the following table.
Table 2-18
Parameter
Bus protocol
Baud rate
Parity
SICAM, SICAM Q100 7KG95xx, Manual
E50417-H1040-C522-A9, Edition 06.2021
Configuration Tab, Modbus RTU Master
Settings for Communication Serial, Modbus RTU Master
Default Settings
-none-
19 200 bit/s
Even
2.6 Serial Communication
Setting Range
-none-
Modbus RTU
(slave)
Modbus RTU master
1200 bit/s, 2400 bit/s
4800 bit/s, 9600 bit/s
19 200 bit/s, 38 400 bit/s
57 600 bit/s, 115 200 bit/s
None, 1 stop bit
Even
Odd
None, 2 stop bit
Basic Functions
69