Siemens SICAM Q100 7KG95 Series Manual page 218

Display and Administration
8.1 Display and Display Settings
Parameter
2 measured values, numerical:
•
Display 1, numerical
•
Display 2, numerical
4 measured values, numerical:
•
Display 1, numerical
•
Display 2, numerical
•
Display 3, numerical
•
Display 4, numerical
2 measured values, graphical, and numer-
ical:
•
Display 1, graph./num.
•
Display 2, graph./num.
3 measured values, graphical, and numer-
ical:
•
Display 1, graph./num.
•
Display 2, graph./num.
•
Display 3, graph./num.
Display x, graph./num. (x = 1 to 3)
•
Min value
•
Max value
•
After the parameterization, click Send.
•
In the navigation window, click Activation and cancel.
•
Click Activation.
218
Default Setting Setting Range
-not assigned- The selection of measured values
depends on the network type.
Designation can be changed during
the parameterization.
-not assigned-
-not assigned-
-not assigned-
Unit according to meas- The selected parameters are used to
ured value define the minimum and maximum
values.
1.0
10.0
SICAM, SICAM Q100 7KG95xx, Manual
E50417-H1040-C522-A9, Edition 06.2021