Sicam Subdevices; Configuration And Value View Via The User Interface - Siemens SICAM Q100 7KG95 Series Manual

Process Connections

4.4 SICAM Subdevices

4.4 SICAM Subdevices
SICAM Subdevices
4.4.1
You can connect up to 2 subdevices of the type SICAM I/O Unit 7XV5673 to a SICAM Q100 device, using one
of the following methods:
•
The internal Ethernet switch and a Y cable
•
An external Ethernet switch
The communication takes place with the Modbus UDP protocol. For more information, refer to the System
Manual SICAM Q100.

Configuration and Value View via the User Interface

4.4.2
Configuration of the SICAM Subdevices
To change the settings of the SICAM subdevices in the Configuration tab, proceed as follows:
•
In the navigation window, click SICAM subdevices.
[sc_subdevices, 1, en_US]
Figure 4-11
•
Configure the respective parameters according to the following table.
130
Configuration Tab, SICAM Subdevices
SICAM, SICAM Q100 7KG95xx, Manual
E50417-H1040-C522-A9, Edition 06.2021