Modbus Tcp To Modbus Rtu Gateway; Function Description - Siemens SICAM Q100 7KG95 Series Manual

Basic Functions
2.5 Ethernet Communication
•
Access rights: as configured
•
Communication supervision time: as configured
Diagnostic Information of Connections
•
Server port:
Server port number of the current connection in the respective column; if 0 is displayed, the connection
is inactive or down
•
Client IP:Port:
Last or current IP address and port number of the client
•
Received bytes:
Total number of bytes received by the TCP port
•
Sent bytes:
Total number of bytes sent to the TCP port
•
Good messages:
Total number of messages received that were detected as valid Modbus messages
•
MBAP header errors:
Error in the MBAP header: incorrect protocol ID or implausible length of data
•
Exception responses:
Counters of the transmitted exception response messages
•
Access rights violations:
Total number of write accesses received if the parameter Access rights for port xxx is set to Read only
of the associated TCP port (for example 502) in the Communication Ethernet input/output window. For
more information, refer to chapter
2.5.3

Modbus TCP to Modbus RTU Gateway

2.5.3.1

Function Description

Modbus TCP to Modbus RTU Gateway Function
The device supports the function of Modbus TCP to Modbus RTU gateway.
52
2.5.1.2 Configuration via the User Interface.
SICAM, SICAM Q100 7KG95xx, Manual
E50417-H1040-C522-A9, Edition 06.2021