Access To The Passive Set Of Parameters By Multiple Users - Siemens SICAM Q100 7KG95 Series Manual

Commissioning and First Steps
11.12 Operation via PC
NOTE
i
i
The file name has the following restrictions:
•
Maximum 8 characters
•
Only containing:
– Letters: a to z, A to Z
– Numbers: 0 to 9
– Hyphen (-) and underline (_)
Cancel
To cancel the configuration in the Configuration tab, proceed as follows:
•
In the navigation window, click Activation and cancel.
[sc_Cancel, 2, en_US]
Figure 11-27
NOTE
i
i
After clicking Cancel, the active set of parameters is copied to the passive set of parameters.
After clicking Cancel, the parameterization is released and can be run from a different computer if neces-
sary.
11.12.3.5

Access to the Passive Set of Parameters by Multiple Users

Reading the Passive Set of Parameters
The user interface allows the simultaneous read access of up to 2 users to the passive set of parameters.
Editing the Passive Set of Parameters
The passive set of parameters can only be edited by one user even though multiple users have simultaneous
read access.
Once a user changes a parameter on the user interface, the write access is denied for all other users.
If the write access is blocked, modified in brackets will be displayed in the upper right corner of the user inter-
face. The user performing the changes will see modified without brackets.
310
Configuration Tab, Cancel
SICAM, SICAM Q100 7KG95xx, Manual
E50417-H1040-C522-A9, Edition 06.2021