8.7
Wind Farm Mode
Configuration and Value View via the User Interface
8.7.1
NOTE
i
i
In the wind-farm mode, the values are calculated based on the network type of 4-wire, 3-phase,
unbalanced.
Activation of the Wind Farm Mode
To activate the wind-farm mode in the Configuration tab, proceed as follows:
•
In the navigation window, click Wind Farm mode.
[sc_q100_wind_farm, 2, en_US]
Figure 8-20
•
Select yes to activate the wind-farm mode. Select no to deactivate the wind-farm mode.
If you activate the wind-farm mode, the device restarts and only the functions for the wind farm are available.
View of the Wind-Farm Values
Under the wind-farm mode, you can view the basic values and AC power values in the Value View tab.
SICAM, SICAM Q100 7KG95xx, Manual
E50417-H1040-C522-A9, Edition 06.2021
Configuration Tab, Wind Farm Mode
Display and Administration
8.7 Wind Farm Mode
239