Siemens SICAM Q100 7KG95 Series Manual page 135

Table 4-4
Parameter
RUN
ERROR
H1
H2
Only the indications for the
parameterization of the binary
outputs are displayed which
can be used according to the
current device settings. Indica-
tions which are read by Modbus
slave devices are available in
the list box if they are parame-
terized in Modbus Master
Mapping.
Indication inverted
•
After the parameterization, click Send.
•
In the navigation window, click Activation and cancel.
•
Click Activation.
NOTE
i i
Select Indication -none- to disable the corresponding LED.
You can find explanations for the LED indications in chapter
Mode.
SICAM, SICAM Q100 7KG95xx, Manual
E50417-H1040-C522-A9, Edition 06.2021
Settings for LEDs
Default Setting
Device ready
-none-
-none-
No
Setting Range
Not settable
Errors are signaled as parameterized (only error
indications can be parameterized).
-none-
Battery failure
Ethernet link error
Time synchronization error
Primary NTP server error
Secondary NTP server
SD card error
Acc. to list box
Limit Violation, Group Indication and Binary
Inputs:
Designation can be changed during the parame-
terization.
No
Yes
12 Troubleshooting, Repair, and Fallback
Process Connections
4.5 LEDs
135